OM-4433 Page 37
8-4. Inspecting And Cleaning Optional Spark Arrestor Muffler
803 582 / Ref. 214 778-B
!
Stop engine and let cool.
1
Spark Arrestor Muffler
2
Cleanout Plug
Remove plug and remove any dirt
covering cleanout hole.
3
Exhaust Pipe
Start engine and run at idle speed to
blow out cleanout hole. If nothing
blows out of hole, briefly cover end
of exhaust pipe with fireproof
material.
!
Stop engine and let cool.
Reinstall cleanout plug.
Tools Needed:
3/8 in
1
2
3
8-5. Servicing Engine Cooling System
803 563
!
Stop engine and let cool.
1
Radiator Draincock
2
Radiator Cap Cover
Change coolant according to engine
manual. Add coolant according to Sec-
tion 5-6).
Run engine until engine reaches normal
operating temperature. Check coolant
level in recovery tank. Add coolant if nec-
essary.
After engine cools, check coolant level
again and add coolant if necessary.
1
2
