21
4.
Position the jack onto the mounting hub on the sprayer hitch. Align the holes in the jack with
the holes in the mount and insert the pin and clip to secure the jack in place.
5.
Turn the leveling crank on the jack until the hitch begins to rise up off the tractor drawbar.
Jack In Hitch/Unhitch
Position
Pin and Clip
Leveling Crank
6.
Relieve the pressure in the hydraulic system. Uncouple the hoses from the tractor remotes.
7.
Disconnect electrical connections on all sprayer accessories.
8.
Pull collar on tractor end of implement driveline to the rear. Slide the driveline off the tractor
output shaft.
9.
Remove the hitch pin and clip. Reinstall the hitch pin and clip in the storage position.
IMPORTANT: The storage slots for the hydraulic hoses should ONLY be used when sprayer
is disconnected from the tractor and being stored. Hydraulic hoses MUST always be con-
nected to tractor during transport of sprayer.
Hitch Pin
Collar On
Tractor End Of
Driveline
Summary of Contents for 500 BW
