OM-193471 Page 12
SECTION 4 − SPECIFICATIONS
4-1.
Serial Number And Rating Label Location
The serial number and rating information for this product is located on the rear panel. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.
4-2.
Unit Specifications
Type of Input
Power
Welding Power
Source Type
Wire Feed
Speed Range
Wire
Diameter
Range
Welding
Circuit Rating
Overall
Dimensions
Weight
115 Volts AC
Single Phase
2 Amperes 50/60
Hz
Constant Voltage
(CV) DC And
Contactor Control
75 to 750 ipm
(1.9 To 19 mpm)
.030 To 3/32 in.
(0.8 To 2.4 mm)
Max Spool Weight:
60 lb (27 kg)
100 Volts,
500 Amperes,
100%
Duty Cycle
Length: 23-1/2 in.
(597 mm)
Width: 10-3/4 in.
(273 mm)
Height: 11 in.
(279 mm)
40 lb (18 kg)
4-3.
Environmental Specifications
A. IP Rating
IP Rating
IP2X
This equipment is designed for indoor use and is not intended to be used or stored outside.
IP2X 2014−06
B. Temperature Specifications
Operating Temperature Range
Storage Temperature Range
14 to 104
°
F (−10 to 40
°
C)
−4 to 131
°
F (−20 to 55
°
C)
Temp_2016- 07
4-4.
Gun Recommendation Table
Process
Gun
GMAW − Hard or Corded Wires
M25 Or M40
FCAW − Self-Shielding Wires
GA-40GL
Notes