.
A complete Parts List is available at www.MillerWelds.com
OM-264 267 Page 28
Ref. 254 087-A
6-7. Sequence Of Piercing Operation
Maintain approximately 90
°
torch
position to surface, and continue
cutting.
Release trigger. Postflow continues for
approx. 20 seconds after releasing trigger;
arc can be instantly restarted during postflow
by raising trigger lock and pressing trigger.
!
The pilot arc starts immediately
when trigger is pressed.
Hold torch at approximately 45
°
to the workpiece. Raise trigger
lock and press trigger. Pilot arc
starts.
Connect work clamp to a clean, paint-free
location on workpiece, as close to cutting
area as possible.
Rotate torch to upright position
approximately 90
°
to surface.
When arc has pierced through
workpiece, start cutting.
90
°
90
°
45
°
Notes
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
