![background image](http://html1.mh-extra.com/html/milltronics/md-256/md-256_instruction-manual_1796958012.webp)
PL-543
12
TERMINAL CONNECTIONS TO MILLTRONICS INTEGRATORS
MD-256
1
+15V
2
CW
3
CCW
4
Cmn
GND
Compuscale
1
2
2
4
N/C
Compu II
15
16
16
14
N/C
Compu IIA
12
13
13
14
N/C
Compu-M
11
12
12
13
N/C
Compu III
30
31
31
32
N/C
Accumass BW-100
8
7
7
6
N/C
Determine the pulley shaft rotation on the end of the pulley shaft to which the MD-256 is
attached.
If the pulley shaft is rotating clockwise then connect the appropriate wire to terminal 2.
If the pulley shaft is rotating counter clockwise then connect the appropriate wire to
terminal 3.
Do not connect terminals two and three at the same time.
N/C indicates that the terminal is not normally connected.