![background image](http://html1.mh-extra.com/html/milltronics/md-256/md-256_instruction-manual_1796958007.webp)
7
PL-543
MOUNTING
The input shaft on the MD-256 is coupled to the rotating shaft on a belt driven pulley and is
not externally supported. The unit’s arresting rod stops it from rotating with the shaft and
can be fitted with a spring to soften sudden speed changes.
The arresting rod should only be solidly attached to the MD-256.
Fixing the rod at both ends will apply binding forces and cause
the unit’s bearings to wear prematurely.
When mounting the unit ensure that it is concentric with the pulley shaft to avoid stresses
on the unit’s bearings.
For preferred mounting locations, refer to the associated belt scale or weigh feeder
instruction manual.
Manuals for these integrators are:
Compuscale
PL-216
Compuscale II
PL-261
Compuscale IIA
PL-281
CompuScale-III
PL-367
Compu-M
PL-516
Accumass BW-100
PL-531