![background image](http://html1.mh-extra.com/html/milltronics/md-256/md-256_instruction-manual_1796958008.webp)
PL-543
8
MOUNTING TO A TAIL PULLEY
Notes:
Distance “d” is the take up travel on the tail pulley
When adjusting the belt take up ensure that there is play on the arrestor rod. If the arrestor
rod is pushed against the end of its travel slot then premature bearing wear may result.
d
Angle bracket slotted
for arrestor rod
Tension spring (supplied)
Flexible conduit
MD-256
Angle bracket slotted
for arrestor rod
Tension spring
Arrestor rod (cut to suit)
MD-256
Flexible conduit
Belt
89mm
3.5”
≥
10mm (.375”)