![background image](http://html1.mh-extra.com/html/milltronics/md-256/md-256_instruction-manual_1796958009.webp)
9
PL-543
MOUNTING TO A BEND OR SNUB PULLEY
Notes:
When mounting to a bend or snub pulley only a 3/8” (10mm) drilled hole is required for the
arrestor rod.
Tension spring (supplied)
Stringer
Belt
Flexible conduit
MD-256
Stringer
3/8” drilled hole for
arrestor rod
Bend or Snub pulley
Tension spring
Arrestor rod (cut to suit)
90mm
3.5”
MD-256
Flexible conduit
Pulley bearing