IMPORTANT!
READ CAREFULLY
PLEASE KEEP FOR FUTURE
REFERENCE!
ASSEMBLY INSTRUCTION
FRAME INSTALLATION AND MOUNTING REAR WHEEL
1) Slide the small tube over the main frame with plastic block, and making sure
the screw fixed aII together. After that, install 2 wheels and fix them by
screws
BICYCLE STEERING SYSTEM
1) Insert 2 foot plate sticker into the front wheels axis. Connect to front fork,
and fix them. Then, put on the fender. After that, Install the front handle bar
into the fork, and fix it by screw.
SADDLE, BASKET AND PUSH BAR
1) Put on basket on rear tube, and install seat. Connect the Parent Pushing Bar.
Then, the whole work is finished. You can use this tricycle finally.
INSTRUCTIONS FOR USE
1) Pedal locking. The user releases locking mechanism of pedals as bicycle
drive pulling towards him the oval handle located on the right side of the
front wheel axis
.
2) Push bar. The push bar may be disassembled very easily. It is enough to
press the locking pin in the fork and take the push bar out of the tube.
WARNING
1) The bicycle should be assembled by adults only.
2) Before use, make sure that the bicycle is properly assembled. Always keep all
parts out of reach of children.
3) The bicycle requires regular periodical inspection.
4) The toy should be used with caution since skill is required to avoid falls or
collisions causing injury to the user or third parties.
5) In case of any damage found immediately stop using the toy.
6) Store the bicycle in dry place. In case it gets wet, clean the bicycle
thoroughly using dry cloth in order to prevent corrosion.
7) Do not allow your child to ride on stairs, public roads and steep slopes or in
the vicinity of deep wholes in the ground or swimming pools, ponds or any
other water bodies.
8) Max. allowable load is 20 kg. Max. allowable load of the basket is 3 kg.
9) Always secure your child with safety belts.
10) Never leave your child unattended.
EN
