25
GB
j
Press the ALTI / BARO button
3
as often as necessary
until
hPa
(hectopascal),
mb
(millibar) or
inHg
(inches
of mercury) appear in the display
5
.
j
Press the MODE button
2
for about 2 seconds. The
air pressure display will flash.
j
Press the RESET
1
and ST. / STP.
4
button to set the
value you want.
j
If you enter incorrect information, press the MODE
button
2
again and enter a new value.
j
Press the ALTI / BARO button
3
to stop the adjustments.
Q
Using the altimeter
CAUTIOn!
Never use the altimeter on an aeroplane.
note:
If the height measured is more than 9164 m /
30065 ft, “HI” will appear in the display
5
.
note:
If the height measured is less than – 706 m /
– 2316 ft, “LO” will appear in the display
5
.
j
Press the ALTI / BARO button
3
until
ALT
appears in
the display
5
.
j
Press the ST. / STP. button
4
for 2 seconds to choose
between the units of meters (m) and feet (ft).
note:
The weather station automatically updates the
altimeter.
