34 |
P a g e
Version 2.1 (10/2020) EN
User Manual for SEIT 1500
Figure 5.12
shows that the detail view of charger pins.
These pins have 3 different parts. Each one is designed to charge SEIT 1500 effectively without harming
the surrounding. Pin isolator separates charging contact (1) from pin (3) so that there is no electric
charge at the pin.
Although, it is well-designed to protect the surrounding from electric shock, do not touch both pins and
do not short-circuit them with a conductive material. In case of unwanted scenarios, docking station has
protections such as short-circuit protection, over voltage protection and over temperature protection.
Charger pins are spring supported products, so they have a stroke length. The stroke length of the pins
are 30 mm which must be taking into consideration in docking procedures.
Figure 5.12: ±48 VDC charger pins
1
Charging contact
3
Pin
2
Pin isolator
