6 |
P a g e
Version 2.1 (10/2020) EN
User Manual for SEIT 1500
Risk of Injury Due to Faults During Operation
Regularly check the SEIT 1500 for visible damage.
Immediately determine the cause of the fault by a qualified personnel.
Immediately remove any escaping gear oil.
Do not step on SEIT 1500 during operation.
Do not ride on the AMR.
Do not exceed the maximum weight limit. Be aware that the maximum payload decreases as the
floor’s incline increases.
Do not exceed the maximum recommended settings as speed of the AMR becomes more
significant when the payload’s center of gravity is increasingly offset from the AMR’s center of
gravity.
Do not allow the AMR to drive through an opening that has an automatic gate or door unless
the door and AMR are configured correctly.
Do not continue to run the AMR if hair, yarn, strings, or any other items have become wound
around its axles, casters, or wheels.
Do not expose the AMR to rain or moisture.
Do not operate the AMR in potentially explosives environment.
2.2.
Intended Use
The SEIT 1500 may only be used for industrial applications and in an industrial environment to convey
SEIT 1500-ready goods such as small packages, cartons, boxes or different pallet sizes up to 1500 kg.
SEIT 1500 is dimensioned only for a certain field of use (
see Technical Data, page 16
) and may not be
operated outside of these specific limits.
Any other use is considered inappropriate. Deviating operating conditions require additional
clarifications, a special release of SEIT 1500 and new contractual agreements.
Any modifications that affect the safety are not permitted.
2.3.
Personnel Qualification
Unqualified personnel does not recognize risks and, as a result, is subjected to greater dangers.
Authorize only qualified personnel with the activities described in these operating instructions.
The operating company must ensure that the personnel follows locally applicable regulations
and rules during their work with regard to safety and dangers.
