Milwaukee 4933459199, Original Instructions Manual

12

12

VII

TECHNICAL DATA 

Screwdriver

M18 FSG

Production code

4580 55 02... 

... 000001-999999

Battery voltage

18 V

No-load speed 

0 - 4500 min

 -1

Torque max. 

13 Nm

Tool reception   

1/4 ” HEX  

(6,35 mm)

Screw diameter max.

6,0 mm

Screw lenghts

25 - 55 mm

Setting range of depth gauge

± 3,8 mm

Weight according EPTA-Procedure 01/2014  (Li-Ion 2,0 Ah)

1,7 kg

Noise information 

Measured values determined according to EN 62841. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A)) 

Sound power level (Uncertainty K=3dB(A))

Wear ear protectors!

71,9 dB (A) 

82,9 dB (A)

Vibration information

Vibration total values (triaxial vector sum) determined according to EN 62841
Schrauben:

Vibration emission value a

h

Uncertainty K=

0,45 m/s

2 

1,5 m/s

2

WARNING!

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 

and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. 

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, 

with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over 

the total working period. 

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is 

running but not actually doing the job. This may significantly reduce the exposure level over the total working period. 

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, 

keep the hands warm, organisation of work patterns.

  WARNING

Read all safety warnings, instructions, 

illustrations and specifications provided with this device. 

Failure to follow the warnings and instructions may result in electric 

shock, fire and/or serious injury. 

Save all warnings and instructions for future reference.

 SCREWDRIVER SAFETY WARNINGS

Hold the power tool by insulated gripping surfaces, when 

performing an operation where the fastener may contact 

hidden wiring. 

Fasteners contacting a “live” wire may make 

exposed metal parts of the power tool “live” and could give the 

operator an electric shock.

Additional Safety and Working Instructions

Use protective equipment. Always wear safety glasses when 

working with the machine. The use of protective clothing is re-

commended, such as dust mask, protective gloves, sturdy non-slip 

footwear, helmet and ear defenders.
Do not machine any materials that present a danger to health (e.g. 

asbestos).
When working in walls ceiling, or floor, take care to avoid electric 

cables and gas or waterpipes.

Clamp your workpiece with a clamping device. Unclamped workpie-

ces can cause severe injury and damage.
Switch the device off immediately if the insertion tool stalls! Do 

not switch the device on again while the insertion tool is stalled, 

as doing so could trigger a sudden recoil with a high reactive force. 

Determine why the insertion tool stalled and rectify this, paying 

heed to the safety instructions.
Possible causes can be:

•  it is tilted in the workpiece to be machined

•  breakage of the material to be used

•  the power tool is overloaded
Do not reach into the machine while it is running.
The insertion tool may become hot during use. 

WARNING! Danger of burns

• when changing tools

• when setting the device down
Chips and splinters must not be removed while the machine is 

running.
Remove the battery pack before starting any work on the appliance.

English