2
6528-51
8 - Stroke Length
Many types of blades are available for a
variety of applications: cutting metal, wood,
nail-embedded wood, scroll cutting, rough-
ing-in and contours.
Many lengths are also available. Choose a
length long enough to extend beyond the
shoe and your work throughout the stroke as
shown. Do not use blades less than 90
mm long since they won't extend beyond
the shoe throughout the stroke.
English
Heavy-Duty Super Sawzall
®
6528-51
Sound and Vibration Information 6528-51
• Typically the A-weighted sound pressure level of the tool is less than 90.8 dB (A). The noise
level when working can exceed 103.8 dB (A). Wear ear protection!
• The typical weighted acceleration is 4.73 m/s
2
.
CE Declaration of Conformity
We declare under our sole responsibility that this product is in conformity with the following
standards or standardized documents. EN 55 014, EN 50 144 (Part 1 and Part 2-17), HD 400.1,
HD 400.3 Section J in accordance with the regulations 73/23/EEC, 89/392/EEC, 89/336/EEC
(from 1st Jan. 1996), and 93/68/EEC.
For additional safety instructions, read Safety Instruction Book No. 58-13-0000.
A
6528-51
1 - Trigger
2 - Insulating Boot
3 - Quik-Lok
®
Blade Clamp
4 - Blade
5 - Adjustable Pivot Shoe
6 - Shoe Release Lever
7 - Speed Control Dial
Advanced Technology Gearing System
Catalog number 6528-51 is equipped with a
unique gearing system that provides efficient
power transmission and extended life in the
most difficult cutting applications. This du-
rable system will absorb impacts, blade lock
ups, and motor stalls. The 6528-51 can be
used for extreme cutting applications such
as large diameter pipe, thick metal, pallets,
and heavy demolition and renovation work as
well as for general purpose cutting.
Assembly
Removing and Replacing
Quik-Lok
®
Cords
MILWAUKEE’S exclusive Quik-Lok
®
Cords
provide instant field replacement or substitu-
tion.
1.
To remove the Quik-Lok
®
Cord, turn the
cord nut 1/4 turn to the left and pull it
out.
2.
To replace the Quik-Lok
®
Cord, align
the connector keyways and push the
connector in as far as it will go. Turn the
cord nut 1/4 turn to the right to lock.
Selecting a Blade
Use
MILWAUKEE Super Sawzall
®
BiMetal
Blades for best performance. When select-
ing a blade, choose the right type and length.
B
To reduce the risk of injury, be sure the
blade always extends beyond the shoe
and work throughout the stroke. Blades
may shatter if they impact the work or
shoe.
Removing and Changing Blades
Before changing blades, be sure the spindle
and blade clamp areas are clean. Metal
chips and sawdust may prevent the Quick-
Lok
®
Blade Clamp from clamping securely.
1.
Twist collar in the direction of the arrow
while removing the blade. Be careful
when handling hot blades.
2.
Depending on the job, the blade may be
inserted with the teeth facing upward or
downward. To install a blade, twist
collar in the direction of the arrow while
inserting the blade into the clamp until
the tang butts against the collar.
3.
Release collar and the spring loaded
mechanicsm will clamp the blade firmly
in place.
4.
Twist collar in the opposite direction of
WARNING!
C
Summary of Contents for 6528-51
Page 1: ...SSE 1000 QX ...
