Milwaukee M18CN16GA-0C, Operator'S Manual

2

GENERAL POWER TOOL           

SAFETY WARNINGS

WARNING

Read all safety warnings, instruc-

tions, illustrations and specifica-

tions provided with this power tool. 

Failure to follow 

all instructions listed below may result in electric shock, 

fire and/or serious injury. 

Save all warnings and in-

structions for future reference. 

The term "power tool" 

in the warnings refers to your mains-operated (corded) 

power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. 

Cluttered or dark 

areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable 

liquids, gases or dust. 

Power tools create sparks 

which may ignite the dust or fumes.

• Keep children and bystanders away while operating 

a power tool. 

Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify 

the plug in any way. Do not use any adapter plugs with 

earthed (grounded) power tools. 

Unmodified plugs 

and matching outlets will reduce risk of electric shock.

• Avoid  body  contact  with  earthed  or  grounded 

surfaces, such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions. 

Water entering a power tool will increase the risk of 

electric shock.

• Do not abuse the cord. Never use the cord for car

-

rying, pulling or unplugging the power tool. Keep 

cord away from heat, oil, sharp edges or moving 

parts. 

Damaged or entangled cords increase the risk 

of electric shock.

• When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. 

Use of a cord 

suitable for outdoor use reduces the risk of electric shock.

• If operating a power tool in a damp location is 

unavoidable, use a ground fault circuit interrupter 

(GFCI) protected supply. 

Use of an GFCI reduces 

the risk of electric shock. 

PERSONAL SAFETY

• Stay alert, watch what you are doing and use 

common sense when operating a power tool. Do 

not use a power tool while you are tired or under 

the influence of drugs, alcohol or medication. 

A 

moment of inattention while operating power tools may 

result in serious personal injury.

• Use personal protective equipment. Always wear 

eye protection. 

Protective equipment such as a dust 

mask, non-skid safety shoes, hard hat or hearing 

protection used for appropriate conditions will reduce 

personal injuries. 

• Prevent unintentional starting. Ensure the switch 

is in the off-position before connecting to power 

source and/or battery pack, picking up or carrying 

the tool. 

Carrying power tools with your finger on the 

switch or energi

s

ing power tools that have the switch 

on invites accidents.

• Remove any adjusting key or wrench before turning 

the power tool on.

 A wrench or a key left attached to a 

rotating part of the power tool may result in personal injury.

• Do not overreach. Keep proper footing and balance 

at all times. 

This enables better control of the power 

tool in unexpected situations.  

• Dress properly. Do not wear loose clothing or 

jewelry. Keep your hair and clothing away from 

moving parts. 

Loose clothes, jewelry or long hair can 

be caught in moving parts.

• If devices are provided for the connection of dust 

extraction and collection facilities, ensure these are 

connected and properly used. 

Use of dust collection 

can reduce dust-related hazards.

• Do not let familiarity gained from frequent use of 

tools allow you to become complacent and ignore 

tool safety principles. 

A careless action can cause 

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool 

for your application. 

The correct power tool will do the 

job better and safer at the rate for which it was designed.

• Do not use the power tool if the switch does not turn 

it on and off. 

Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from 

the power tool before making any adjustments, 

changing accessories, or storing power tools. 

Such 

preventive safety measures reduce the risk of starting 

the power tool accidentally.

• Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool 

or these instructions to operate the power tool. 

Power 

tools are dangerous in the hands of untrained users.  

• Maintain power tools and accessories. Check for 

misalignment or binding of moving parts, breakage 

of parts and any other condition that may affect 

the power tool’s operation. If damaged, have the 

power tool repaired before use. 

Many accidents are 

caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting edges are 

less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking into 

account the working conditions and the work to be 

performed. 

Use of the power tool for operations different 

from those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean 

and free from oil and grease. 

Slippery handles and 

grasping surfaces do not allow for safe handling and 

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the 

manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire when used with 

another battery pack.

• Use power tools only with specifically designated 

battery packs. 

Use of any other battery packs may 

create a risk of injury and fire.

• When battery pack is not in use, keep it away from 

other metal objects, like paper clips, coins, keys, 

nails, screws or other small metal objects, that can 

make a connection from one terminal to another. 

Shorting the battery terminals together may cause 

burns or a fire. 

• Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally 

occurs, flush with water. If liquid contacts eyes, 

additionally seek medical help. 

Liquid ejected from 

the battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or 

modified. 

Damaged or modified batteries may exhibit 

unpredictable behavior resulting in fire, explosion or 

risk of injury.

• Do  not  expose  a  battery  pack  or  tool  to  fire  or 

excessive temperature. 

Exposure to fire or temperature