Milwaukee PFH 26, Original Instructions Manual

17

ENGLISH

EC-DECLARATION OF CONFORMITY

Winnenden, 2011-11-14

Rainer Kumpf

Manager Product Development
Authorized to compile the technical 

fi

 le

MAINS CONNECTION

 Connect only to single-phase a.c. current and only to the 

system voltage indicated on the rating plate. It is also 

possible to connect to sockets without an earthing contact 

as the design conforms to safety class II.

MAINTENANCE

SYMBOLS

Please read the instructions carefully before 

starting the machine.

Accessory - Not included in standard 

equipment, available as an accessory.

Do not dispose of electric tools together 

with household waste material! In 

observance of European Directive 2002/96/

EC on waste electrical and electronic 

equipment and its implementation in 

accordance with national law, electric tools 

that have reached the end of their life must 

be collected separately and returned to an 

environmentally compatible recycling 

facility.

Class II construction, tool in which 

protection against electric shock does not 

rely on basic insulation only, but in which 

additional safety precautions, such as 

double insulation or reinforced insulation, 

are provided.

289 776 - PH26.indd   17

289 776 - PH26.indd   17

14.11.2011   14:52:41

14.11.2011   14:52:41

The ventilation slots of the machine must be kept clear at all 

times.
Important note! If the carbon brushes are worn, in addition to 

exchanging the brushes the tool should be sent to after-sales 

service. This will ensure long service life and top 

performance.
Use only Milwaukee spare parts. Should components need 

to be replaced which have not been described, please 

contact one of our Milwaukee service agents (see our list of 

guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. 

Please state the Article No. as well as the machine type 

printed on the label and order the drawing at your local 

service agents or directly from Milwaukee Australia (Toll 

Free Telephone Number 1300 361 505 Email 

Milwaukee@ttibrands.com.au) or Milwaukee New Zealand 

(Toll Free Telephone Number 0800 279 624 Email 

Milwaukee@ttibrands.co.nz).

Always disconnect the plug from the power 

supply socket before carrying out any 

maintenance work on the machine.

We declare under our sole responsibility that this product is in 

conformity with the following standards or standardized documents. 

EN55014-1:2006+A1:2009+A2:2011, EN55014-2:1997+A2:2008, 

EN61000-3-2:2006+A1:2009+A2:2009, EN61000-3-3:2008, 

EN60745-1: 2009+A11:2010, EN60745-2-6:2010, 2011/65/EU, 

2006/42/EC, 2004/108/EC