MIMAKI CF22-1225, Safety Precautions

10

CAUTION

CAUTION

DISCLAIMER OF WARRANTY : THIS LIMITED WARRANTY OF MIMAKI SHALL BE THE SOLE AND
EXCLUSIVE WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES,EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS, AND
MIMAKI NEITHER ASSUMES NOR AUTHORIZES DEALER TO ASSUME FOR IT ANY OTHER OBLIGATION
OR LIABILITY OR MAKE ANY OTHER WARRANTY OR MAKE ANY OTHER WARRANTY IN CONNECTION
WITH ANY PRODUCT WITHOUT MIMAKI’S PRIOR WRITTEN CONSENT. IN NO EVENT SHALL MIMAKI BE
LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR LOSS OF PROFITS OF
DEALER OR CUSTOMERS OF ANY PRODUCT.

FCC Statement (USA) & EN55022 (Europe)

This machine has been tested and found to comply with the limits for a Class A digital machine, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the machine is operated in a commercial environment. This machine generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the Operation manual, may cause harmful
interference to radio communications.
Operation of this machine in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
In the case where MIMAKI-recommended cable is not used for connection of this machine, limits provided by
FCC rules can be exceeded.
To prevent this, use of MIMAKI-recommended cable is essential for the connection of this machine.

Interference to televisions and radios

The product described in this manual generates high frequency when operating.
The product can interfere with radios and televisions if set up or commissioned under improper conditions.
The product is not guaranteed against any damage to specific-purpose radio and televisions.
The productfs interference with your radio or television will be checked by turning on/off the power switch of the
product.
In the event that the product is the cause of interference, try to eliminate it by taking one of the following
corrective measures or taking some of them in combination.

• Change the orientation of the antenna of the television set or radio to find a position without reception difficulty.
• Separate the television set or radio from this product.
• Plug the power cord of this product into an outlet which is isolated from power circuits connected to the television

set or radio.