background image

CJV150/300/300 Plus Metallic Color Printing Guide

This manual describes the effects that can be expressed when silver ink is used in CJV150/300/300 Plus, and
how to set and print them.
Please read this manual carefully and use it correctly.

Note

• It is strictly prohibited to write or copy a part or whole of this document without our approval.
• This document has been carefully prepared for your easy understanding, however, please do not hesitate to

contact a distributor in your district or our office if you have any inquiry.

• Description contained in this document are subject to change without notice for improvement.
• Copying the Mimaki Engineering Co. Ltd. software described in this guide to other disks (except for backup

purposes) or loading it to memory except for the purpose of running it, is strictly prohibited.

• Due to improvement or change of software, the description of this document could be partially different in

specification, for which your understanding is requested.

• With the exception of what is provided for in the warranty provisions of MIMAKI ENGINEERING CO., LTD., we do

not assume any liability against the damages (including but not limited to the loss of profit, indirect damage,
special damage or other monetary damages) arisen out of the use or failure to use of this product. The same shall
also apply to the case even if MIMAKI ENGINEERING CO., LTD. had been notified of the possibility of arising
damages in advance. As an example, we shall not be liable for any loss of the media made using this product or
indirect damages caused by the product made using this media.

• You can also download the latest operation manual from our website.

Notations used in this document

• Items and buttons displayed in menus and on screens are marked with square brackets ([ ]) as in [File].

Screen image used in this document

• The explanation is based on the screen image of RasterLink6Plus as an example.
• RasterLink6Plus and RasterLink7 are referred to as RasterLink in together.

Symbols

RasterLink is the trademarks or registered trademarks of MIMAKI ENGINEERING CO., LTD. in Japan and in other
countries.
Adobe, the Adobe logo, Acrobat, Illustrator, Photoshop, and PostScript are the trademarks or registered trademarks
of Adobe Systems Incorporated in the United States and other countries.
CorelDRAW is a trademark or registered trademark of Corel Corporation in Canada, the United States and other
countries, and its affiliates.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation of the United States and
other countries.
Apple and Macintosh are trademarks or registered trademarks of Apple Inc. of the United States and other coun-
tries.
Other company and product names mentioned herein are the trademarks or registered trademarks of the respective
companies in Japan and in other countries.

• This symbol indicates important information for using this product.

• This symbol indicates useful information.

Summary of Contents for CJV150 series





































Reviews: