- 30 -
Pull-back printing
Print part of the illustration in Metallic color
This section describes this procedure from data creation to printing using the steps required to set the
character text of the illustration below to metallic color and printing it using pull-back printing as an example.
By taking advantage of the swatch library of the metallic color, you can easily print the metallic color
1.
Create metallic color plate and color plate.
(1)
Select a character on the application.
(2)
Specify any color from the MIMAKI SS21 Metallic Color Library.
(3)
Click [Setting] of RasterLinkTools.
Example of printing
Reference page
Print the part of the illustra-
tion in Metallic color
• Please create always a data in CMYK mode.
Want to print a character in
the color of the color
swatches of metallic color.
Specify the word "OCEAN" to
"S-07C"
Specify the word "DEW" to
"Cold_01"
