2
抽墨幫浦墨管清洗(Pump Pipe)
[Disway WASH]
The ink discharge way may become clogged by coagulated ink. It must be cleaned at
regular intervals to avoid clogging.
Ink discharge way: Tubing between the cap and the waste ink tank
• When cleaning the ink station and head, be sure to wear the supplied
goggle and gloves since you may get ink in your eyes.
• Do not move the carriage out of the capping station by hand. Use the appro-
priate operation key to move the carriage.
Cleaning tools
•
Cleaning fluid RS for maintenance (SPC-0336)
•
Pipette
•
Glove
STEP
1.
按 下
[FUNCTION]
鍵
.
2.
按上下鍵
[ ] and [ ]
一直到
LCD顯示
[MAINTENANCE].
3.
按下
[ENTER]
鍵
.
[STATION] is displayed.
4.
Push the [ENTER] key.
[CARRIAGE out]
LCD顯示
5.
按上下鍵
[ ] and [ ]
一直到
LCD顯示
[ Disway WASH].
6.
按下
[ENTER]
鍵
.
墨座移出至列印工作平台.
抽墨幫浦(Pump)會連續抽墨約5秒鐘,然後暫停10秒鐘.
FUNCTION
SET UP
< ENT >
FUNCTION
MAINTENANCE
< ENT >
MAINTENANCE
STATION
< ent >
STATION
MENT : CARRIAGEout
STATION
MENT : Disway WASH
STATION
COMPLETED
: ent
