MIMAKI JV300-130 A Maintenance Manual Download

Page: 142 / 244

6.2.5

P.1

6.2.5 Pump Motor



Work procedures

1. Remove the

Under cover R, Cover R

and

Cover R2

2. Remove the

Selective path Assy

. (Refer to

6.2.5

)

3. Remove the

Pump Assy

. (Refer to

6.2.5

)

Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.

Be sure to wear protective glasses and working gloves during the operation.
Ink may get into your eyes depending on the working condition, or hand skin may get rough if you touch
the ink.

Pump Motor

Take care not to pollute the surroundings with waste
ink or washing liquid.

R.1.0

MAINTENANCE MANUAL > Disassembly and Reassembly > Ink-related Parts > Pump Motor

Model

JV300-130/160

Issued 2014.05.30 Revised

F/W ver

1.00

Remark

1.0

Rev.

Summary of Contents for JV300-130 A





















































































































































































































































Search results

Summary of Contents for JV300-130 A

Reviews:

Related manuals for JV300-130 A

Brands by name

Popular brands

MIMAKI JV300-130 A, Maintenance Manual

Search results

Summary of Contents for JV300-130 A

Reviews:

Related manuals for JV300-130 A

Brands by name

Popular brands