MIMAKI JV300-130 A Maintenance Manual Download

Page: 193 / 244

6.5.3

P.1

6.5.3 NCU Assy. (Nozzle Missing Detector)



Work procedures

1. Turn the main power OFF.

2. Remove the Front cover M and L.

3. Move slowly the carriage onto the platen by hand.
4. Remove the NCU absorber tray. (take off a hook).

5. Disconnect the all connectors.

6. Remove screws (x2) on the NCU frame, and then remove the

NCU Assy.

7. Reverse the disassembly procedure for reassembly.

Turn the main power OFF when turning the power OFF. It is very dangerous if sleep mode functions
mistakenly during the operation.

NCU Assy.

NCU absorber tray

NCU Assy.

R.1.0

MAINTENANCE MANUAL > Disassembly and Reassembly > Electrical Parts > NCU Assy. (Nozzle Missing Detector)

Model

JV300-130/160

Issued 2014.05.30 Revised

F/W ver

1.00

Remark

1.0

Rev.

Summary of Contents for JV300-130 A





















































































































































































































































Search results

Summary of Contents for JV300-130 A

Reviews:

Related manuals for JV300-130 A

Brands by name

Popular brands

MIMAKI JV300-130 A, Maintenance Manual

Search results

Summary of Contents for JV300-130 A

Reviews:

Related manuals for JV300-130 A

Brands by name

Popular brands