7
Media press
When the cut dust of the media and other dusts accumulate between the media holder and the platen, it could
cause the risks that the transfer of the media could not be performed properly or such dusts stick to the nozzles
and this could interfere the proper printings. You are recommended to clean it frequently.
Replacing method of C absorber kit ("Replacing method
of C absorber kit" Chapter 4 of the Operation Manual)
If ink adheres to the C absorber, it is required to replace the C absorber.
Rough guide for replacement:
Replace when the concavity and convexity of the surface of the
absorber are filled with ink as indicated in the right photo.
*SUJV-160 has a different cap shape.
1
Move the carriage.
• Move the carriage referring to “Replacing method of C
absorber kit” Step 1 to 4, Chapter 4 of the Operation Manual.
2
Open the right maintenance cover.
3
Replace the C absorber.
Media press
Media press with dust
Dirty C absorber
Dirty C absorber
Capping station
C absorber
C absorber2
