- 4 -
TO CONTINUE PLOTTING EVEN WHEN THE INK RUNS OUT DURING PLOTTING
[PRINT CONT.]
FOR 1-WAY HIGH-SPEED PLOTTING
Even if the ink in one ink station runs out during plotting, this function permits the current plotting
operation to be continued without interruption by using the other ink station.
1.
Select a type.
1. Press the [FUNCTION] key.
2. Press the [ENTER] key.
3. Select any Type1 through 4 by pushing the JOG keys [
] and
[
].
2.
Press the [ENTER] key.
3.
Press the [ ] and [ ] key until the display gives the
indication [PRINT CONT.].
4.
Press the [ENTER] key.
5.
Set a PRINT CONT. by pushing the JOG keys [ ]
and [ ].
Here, select ON.
6.
Press the [ENTER] key.
7.
Push the [END] key twice, and the menu returns to
the LOCAL mode.
SETTING THE TYPE OF INK TO BE USED [INKTYPE]
FOR 2-WAY MULTI-PLOTTING
This function selects the type of ink that is to be used.
1.
Select a type.
1. Press the [FUNCTION] key.
2. Press the [ENTER] key.
3. Select any Type1 through 4 by pushing the JOG keys [
] and
[
].
2.
Press the [ENTER] key.
3.
Press the [ ] and [ ] key until the display gives the
indication [INKTYPE].
4.
Press the [ENTER] key.
5.
Set a type of ink to be used by pushing the JOG
keys [ ] and [ ] .
Here, select Dye.
6.
Press the [ENTER] key.
7.
Push the [END] key twice, and the menu returns to
the LOCAL mode.
FUNCTION
SET UP
<ENT>
SET UP
SELECT
: TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
PRINT CONT.
< ent >
TYPE.1
PRINT CONT.
: OFF
TYPE.1
PRINT CONT.
: ON
TYPE.1
PRINT CONT.
< ent >
<< LOCAL >>
width : 1272mm
FUNCTION
SET UP
<ENT>
SET UP
SELECT
: TYPE.1
TYPE.1
PRINT MODE
< ent >
TYPE.1
INKTYPE
< ent >
TYPE.1
INKTYPE
: Pigcm
TYPE.1
INKTYPE
: D y e
TYPE.1
INKTYPE
< ent >
<< LOCAL >>
width : 1272mm
