MIMAKI SIJ-320UV Operation Manual Download

Page: 7 / 124

Safety Precautions

Symbols

Symbols are used in this Operation Manual for safe
operation and for prevention of damage to the machine.
The indicated sign is different depending on the content of
caution.
Symbols and their meanings are given below. Please
follow these instructions as you read this manual.

Examples of symbols

Warning for Use

Meaning

Failure to observe the instructions given with
this symbol can result in death or serious
injuries to personnel. Be sure to read it carefully
and use it properly.

Failure to observe the instructions given with
this symbol can result in injuries to personnel or
damage to property.

Important notes in use of this machine are
given with this symbol. Understand the notes
thoroughly to operate the machine properly.

Useful information is given with this symbol.
Refer to the information to operate the machine
properly.

Indicates the reference page for related
contents.

The symbol "

" indicates that the

instructions must be observed as strictly as the
CAUTION instructions (including DANGER and
WARNING instructions). A sign representing a
precaution (the sign shown at left warns of
hazardous voltage) is shown in the triangle.

The symbol "

" indicates that the action

shown  is  prohibited.  A  sign  representing  a
prohibited  action  (the  sign  shown  at  left
prohibits  disassembly)  is  shown  in  or  around
the circle.

The symbol "

" indicates that the action

shown  must  be  taken  without  fail  or  the
instructions  must  be  observed  without  fail.  A
sign  representing  a  particular  instruction  (the
sign shown at left instructs to unplug the cable
from the wall outlet) is shown in the circle.

WARNING

• Do not use the machine in a poorly ventilated room or

a closed room.

• Take care not to damage, break or work upon the

power  cable.  If  a  heavy  material  is  placed  on  the
power  cable,  or  if  it  is  heated  or  pulled,  the  power
cable  can  break,  thus  resulting  in  fire  or  electric
shocks.

• Avoid locating the machine in a damp environment. Do

not splash water onto the machine. Use in such an
environment can give rise to fire, electric shocks or
breakdown of the machine.

• Use it with the displayed power supply specifications.

The power-supply voltage of this machine shall be
single-phase 200 to 240 Vac 15A and less. (You
cannot use this machine in the 100V system.)

• Use of the machine under an abnormal condition

where it produces smoke or strange smell can result in
fire or electric shocks. If such an abnormality is found,
be sure to turn off the power button immediately and
unplug the cable from the wall outlet. Check first that
the machine no longer produces smoke, and then
contact your distributor or a sales office of MIMAKI for
repair. Never repair your machine and ink bottle by
yourself since it is very dangerous for you to do so.

• Never disassemble or remodel the main unit of the

machine or the ink bottle. Disassembly or remodeling
can result in an electric shock or breakdown of the
machine.

• Take care that no dust or dirt sticks to platen. Dust and

dirt sticking heaters can cause fire.

•

Hazardous Moving Parts

Keep Fingers and Other Body Parts Away

• The main power circuit breaker should be set ON only

by personnel with sufficient knowledge about
operations of this unit.

• Do not touch the LED UV unit on or right after the lamp

off with bare hands to avoid from burn injury.

Handling of LED UV unit

• Do not use the LED UV in an ambience with a

possibility of catching fire (gasoline, combustible gas
spray, thinner, lacquer, powder dust, etc.). In addition,
do not put paper or cloth near or on the LED UV, or it
may cause fire.or it may cause electrical shock.

• Never look at the LED UV being lit with your naked

eyes,or it may cause pain in your eyes or visual
impairment.Be sure to wear safety glasses.

• Do not apply ultraviolet (UV) light directly to your

skin,or it may cause irritation on your skin.

• It is recommended to replace the LED UV unit within

the rated life.

Disposition of this machine

• When discarding this machine, request the treatment

of it for an industrial waste disposal contractor.

• Treat it properly in compliance with regulation in the

local area.