- 3.11 -
Improving the deNSITY of ink color [INK LAYERS]
This function sprays the ink in two or more layers (wet-on-wet coating) to improve the density of
ink color.
If a coarse-surfaced fabric (e.g., canvas) is used, the color of ink might be weak. In this case, execute
this function (wet-on-wet coating).
•
When using a silk or other cloths with high moisture-elasticity, do not make
double-printing. The printing quality may be reduced because of expansion
and contraction of the cloth, or the head may catch the cloth to push it to a
position resulting in cloth jam.
STEP
1.
Select a type.
(see page 3.4). Here, select [Type.1].
2.
Push the [ENTER] key.
3.
Set a [INK LAYERS] by pushing the JOG keys
[ ] and [ ].
4.
Push the [ENTER] key.
5.
Select the number of ink layers using the [ ]
and [ ].
A number 1 to 9 can be selected as the number of times of
reprinting.
Here, select [3] times.
6.
Push the [ENTER] key.
7.
Push the[END] key twice, and the menu returns
to the LOCAL mode.
SET UP
SELECT
: TYPE.1
TYPE.1
MEDIA COMP.
< ent >
TYPE.1
INK LAYERS
< ent >
TYPE.1
INK LAYERS
: 1
TYPE.1
INK LAYERS
: 3
TYPE.1
INK LAYERS
< ent >
<< LOCAL >>
width : 1272mm
Summary of Contents for TextileJet Tx2-1600 Series
