- 3 -
Setting the printer
Standard setting
When printing using this guide, set the printer as follows.
1.
Turn on the printer’s power.
• Wait until <Local> is displayed on the panel.
2.
Select [UV MODE] on the panel, as follows:
(1)
With <Local> displayed, press the
key.
(2)
Use the
key to select [SETUP], then press the
key.
(3)
Use the
key to select [SETUP 1] to [SETUP 4], then press the
key.
(4)
Use the
key to select [UV MODE], then press the
key.
(5)
Use the
key to select [ON], then press the
key.
3.
Select [MAPS4] on the panel, as follows:
• Use the
key to select [MAPS4], then press the
key.
4.
Select “AUTO” for [MAPS4], as follows:
(1)
Press the
key.
(2)
Use the
key to select “AUTO”, then press the
key.
5.
Return to <Local>, by pressing the
key several times.
• If the power is already on, have the panel display <Local>.
• The default value of [UV mode] is [ON].
