MIMAKI UJF-6042MkII Series, Manual

5

For safe operation

1

2

2

2

2

2

1

WARNING

• Be sure to setup the appropriate air-moving system in

case of using this machine in a closed room or a room
with bad ventilation.

• Cautions for constructing exhaust outlet

Please observe the following cautions to

avoid breakdown of this machine.

(1) The opening area of the exhaust outlet

requires more than half of the duct
entrance area.

(2) If mounting a valve on the exhaust outlet,

be sure to open the valve when using the
machine.

• The included power cable set can be used

with this machine only. This power cable set
cannot be used with any other electrical
devices. To prevent a fire or electric shock, do
not use any power cable set other than the
one included.

• The ink used for this machine falls into the category of

UN No.3082 and UN Class 9. Since the ink is
flammable, never use fire when using the machine.

• When cleaning the heads, make sure to wear the

attached goggles and gloves.

• The gloves supplied with the machine are disposable.

When all the gloves are expended, purchase an
equivalent product on the market.

• If anyone swallows ink or cleaning solution in mistake,

get the person to vomit and see a doctor immediately.
Do not let him or her swallow the vomit. Then, refer
SDS about the inquiry.

• If you inhale a lot of vapor and feel bad, immediately

move to a location of fresh air and then keep yourself
warm and quiet. Then, consult a doctor as soon as
possible.

• Discard the waste ink according to the local

regulations of the area that this machine is used.

• The set of power cables provided with this machine is

for use with this machine only, and cannot be used
with other electrical devices. Do not use any power
cables other than the ones provided with the machine.
Failure to observe those instructions may result in fire
or electric shocks.

• Take care not to damage, break or work upon the

power cable. If a heavy material is placed on the
power cable, or if it is heated or pulled, the power
cable can break, thus resulting in fire or electric
shocks.

• Do not use this machine in an environment where

humidity is high or the machine may get wet. Using the
machine under such environment may result in fire or
electric shock, or cause malfunction.

• Use of the machine under an abnormal condition

where it produces smoke or strange smell can result in
fire or electric shocks. If such an abnormality is found,
be sure to turn off the power switch immediately and
unplug the cable from the wall outlet. 

• Check first that the machine no longer produces

smoke, and then contact your distributor or a sales
office of MIMAKI for repair.

• Never repair your machine by yourself since it is very

dangerous for you to do so.

• Never disassemble or remodel the main unit of the

machine or the ink cartridge. Disassembly or
remodeling can result in an electric shock or
breakdown of the machine.

• Take care that no dust or dirt sticks to Media Transfer

Surface heaters. Dust and dirt sticking heaters can
cause fire.

• Do not use extension cords. Doing so may result in fire

or electric shocks.

• Keep the power plug prong clear of any foreign object

such as a piece of metal. Failure to do so may result in
a fire or electric shocks.

• Do not plug too may leads into a single socket. Doing

so may result in fire or electric shocks.

• Do not use the machine if the power cord or plug is

damaged. Using the machine with damaged power
cord may result in fire or electric shocks. Contact your
service representative for replacement cord.

• Do not handle the power plug with wet hands.Doing so

may result in electric shocks.

• Grasp by holding the plug itself when removing the

power plug from wall outlet, and never hold by the
cord. Holding and pulling the cord may damage the
cord, leading to fire or electric shocks.

• To prevent a fire or electric shock, do not use

the device at a power supply voltage other
than the one indicated.

• To prevent a fire or electric shock, do not use

the device at a power supply frequency other
than the one indicated.

• Keep your fingers and other body parts away

from dangerous moving parts of the device.

• If metals, water, liquids or similar foreign

material enters the device, turn the power
supply off immediately, make sure to
disconnect the power plug, and contact the
service center.
Using the device without addressing the issue
can result in a fire or electric shock.

• If the ink leakage occurs, unplug the power

plug to turn off the main power switch, and
contact our service office or distributor.

WARNING