2-1. Cable Assembly
2. Assemble instruction
1) Insert the cable with the same color plug as the sticker
color on the back of the screen into the housing as
shown
2) Adjust the cable plug wing into the designated housing
Same Color
Wings
3) Align cable plug wings with the housing
4) Lift the front of the cable plug slightly upward (about 2 degrees) to
align with the internal connector.
5) Push the cable plug into the connector. If the connector ends are
properly aligned, insertion does not require significant force.
* Caution : Do not push the cable plug with more than 6kg force. An
insertion force of much more than 6kg force may cause product
damage or the connector to be damaged
7) Repeat to connect each cable as shown above and verify if all
cables are connected properly
6) Check if the cable plug is connected correctly as shown in
the picture.
About 2 degree
Green cable: HDMI Cable
Blue cable: USB 3.0 Cable
Red cable: Power Cable
2
