7. INFANT CAR SEAT INSTALLATION IN VEHICLE SEAT
1. Place the infant car seat rear-facing
on the vehicle seat and make sure the
handle is in the appropriate position.
Your child should face the vehicle seat
backrest.
2. Pull out the vehicle seat belt and pass
the vehicle lap belt through the infant
car seat lap belt guide. Fasten the seat
belt into the buckle until you hear a
“click” sound.
3. Pass the vehicle shoulder belt
through the shoulder belt guide located
at the back of the infant car seat.
4. Tighten the vehicle seat belt by
pulling the seat belt in the direction of
the arrows as shown. Make sure the seat
belt is tight and not twisted. Adjust the
car seat to the proper recline position to
ensure maximum protection for the
child.
9
10
Warning!
Do not install the infant car seat at the lateral and rear-facing passenger seat
(1a, 1b). This infant car seat can only be installed on a forward facing passenger seat (1c,
1d). Only use 3-point vehicle seat belts to install this infant car seat.
