4
3
3. ASSEMBLING THE SCOOTER
4. ADJUSTING THE HANDLE BAR
1. Lite Buddy scooter comes with 4
components - scooter frame, push
bar, push bar connector and carry
strap.
2. Unfold the scooter frame and push
the seat down until you hear a ‘click’
sound, to ensure that the seat is
locked in place.
3. Attach the push bar connector to
the the push bar. Match the groove of
the push bar to the protruding part in
the height adjusting bar on the
scooter frame.
4. Depress the height adjusting
button as you slot in the push bar into
the height adjusting bar.
WARNING! Before using the Lite Buddy, please make sure the push bar and screws
are tightened. Check that the wheels show no sign of wear.
5. Adjust the push bar to your
preferred height. The height adjusting
button should protrude out of a hole
along the height adjusting bar.
6. Tighten the push bar connector to
make sure that the push bar and the
height adjusting bar are tightly
connected.
Your Lite Buddy scooter is fully
assembled for your use!
1. Loosen the push bar connector and
press down the height adjusting
button.
Adjust the push bar to your preferred
height - there are 2 different height
positions.
The height adjusting button should
protrude out of the hole of your
preferred height along the height
adjusting bar.
