30
Application Notes
Figure 13. Reversing with a DLC600
Reversing with a DLC600
DIGI-LOK controller DL600 can be used in a reversing
application. The controller must be inhibited while braking.
Without the inhibit feature, the controller will continue to
regulate, causing overshoot when the DIGI-LOK is switched
back to the drive.
Figure 13 shows the connection of the reversing circuit to an
MM20000 series drive and a DLC600. Only one feedback
device (encoder or magnetic pickup) may be used at any time.
250-0089r3_readers_spreads.qxd 7/3/01 10:48 AM Page 30