4
Connect the NeXus
The NeXus-10 can be connected wirelessly by using (1) Bluetooth. The NeXus-10 also allows
for (2) USB connection.
Bluetooth pairing
Use the internal Bluetooth of the computer or connect the Bluetooth dongle to the
computer and deactivate the internal Bluetooth of the computer.
Switch the NeXus on by pressing and shortly holding the power button.
Select Start >
Settings
>
Devices
>
Bluetooth
Open
Bluetooth
> select the NeXus device >
Pair
.
Enter the passcode for the device. These are the last 4 digits of the serial number displayed
on the screen.
Follow further instructions.
USB connection
Connect the USB cable (1) to a USB input on the computer. Connect the micro USB cable (2a)
to the NeXus micro USB input (2b).
Switch the NeXus on by pressing and shortly holding the power button (3).
A notification will appear in the bottom right corner. A notification is shown once driver
installation has finished.
(1)
(2a)
(2b)
(3)
