9
3 Parameter menus
3-1 Introduction
This section describes the programmable parameters, to change the parameter values.
Refer to
3-2 Example 1: Single-parameter setting by scanning 1D barcodes
Multiple-parameter setting by scanning a QR code barcode
, scan the appropriate barcodes
included in this section, The new values replace the existing values.
To set the new values as custom default settings, scan the Write to Custom Defaults barcode. The
factory default settings or custom default settings can be recalled by scanning appropriate
barcodes, refer to
10 Return default parameters & firmware version
Send parameters through the TTL-level TTL-232 or USB virtual COM interface. Instructions of
programming and querying the scanner are described in
