32
3-12 UPC-A
Read:
Format
System character Data digits (10 digits)
Check digit
Check digit verification:
The check digit is optional.
Check digit trans.:
By setting Enable, check digit will be transmitted.
Code ID setting:
Code ID is a one-two-character string used to represent the symbol upon a
succeeding reading. If you want application to transmit Code ID, you must set Code ID transmission to
be enabled. Refer to
Insertion group selection:
Refer to Global insertion group selection of
Supplement digits:
The Supplement digits barcode is the supplemental 2 of 5 characters.
Format
System character Data digits (10 digits)
Check digit Supplement digits 2 of 5
Truncation/Expansion:
Truncate leading zeros
- The leading
“0” digits of UPC-A data characters can be truncated when
the feature is enabled.
Example: Barcode “001234567895”,
Output: “1234567895”.
Expand to EAN-13
- It extends to 13-digits with a
“0” leading digit when the feature is enabled.
Example: Barcode “001234567895”,
Output: “0001234567895”.
Truncate system character
- The system character of UPC-A data can be truncated when the
feature is enabled.
Example: Barcode “001234567895”,
Output: “01234567895”.
Add country code
- The country code (
“0” for USA) can be added when the feature is enabled.
Example: Barcode “001234567895”,
Output: “0001234567895”.
Multiple-scan setting
Single-scan setting
Option barcode
Option
Alpha. entry
Read
Disable
00
Enable
01*
*
Check digit verification
Disable
00
Enable
01*
*
Check digit trans.
Disable
00
Enable
01*
*
Code ID setting
00-FF
16
(ASCII)
00-FF
16
<A>*
*
Insert group selection
00-66
00-66
