9
After you have followed these steps, the app will remember the Magic Blue you have chosen (you
usually don’
t need to follow these steps again, unless you want to use another Magic Blue).
You should not pair the Magic Blue by the device generic Bluetooth settings. (Attention: If you pair
your bulb that way, you won’t be able to find and select the Magic Blue from inside the eSense app.
If you did so by accident, simply un-pair the Magic Blue from the generic Bluetooth settings and
follow the steps above).
Question 2:
What can I do, if connecting to Bluetooth fails or the Magic Blue is not found?
Restart the Magic Blue (switch the switch of your lamp off and on again). Especially if the Magic Blue
is already switched on more than 1 minute, the Magic Blue stops sending the Bluetooth signal to
connect. Restarting activates the signal again and the Magic Blue can be found.
Question 3:
Why can’t I find the device w
hen scanning for Bluetooth devices?
Check the light from the Magic Blue to make sure the Magic Blue is switched on. If there is metal
around the Magic Blue (for example a lampshade around the Magic Blue), it could shield the Magic
Blue and block the signal.
Make also sure that the Magic Blue is not connected to another phone or tablet already since the
Magic Blue can just be connected to one phone or tablet at a time (see also next question).
Question 4:
How many Magic Blue bulbs can I control at the same time?
You can control one Magic Blue at the same time.
Question 5:
How far can the distance between Magic Blue and phone or tablet be?
Usually the range is 18 to 30 meters without any objects in between. It will be less with objects
between the Magic Blue and your phone or tablet (for example a wall between the Magic Blue and
the smartphone or tablet can decrease the range).
