Mindray Anesus ME7T Operator'S Manual Download

Page: 89 / 312

4 Setup

Operator’s Manual

4 - 31

Print Service Preset

DICOM print preset items are described as follows:

Item

Description

Device

After you set the server (s) in DICOM Preset screen, the name (s) will
appear in the drop-down list, select the name of the print server.

Service Name

Default is xxx-Print, user-changeable.

AE Title

Application Entity title, here, it should be consistent with that of the
print server.

Port

DICOM communication port, 104 is default. Here, the port should be
consistent with that of the print server port.

Maximum Retries

It starts retrying if it fails to send DICOM task to the server. The retry
entry times should be this value.

Interval Time (s)

Reserved time.

Timeout

Refers to the amount of time after which the system will stop trying to
establish a connection to the service.

TLS

Transport Layer Security. Select whether to encrypt the data during
network transportation.

Copies

Refer to copies of printed files. You can select among 1 through 5, or
directly enter the numeral.

Settings

The system supports RGB (color printing) and MONOCHROME2
(black and white printing). Please select the type the printer supports.

Film Orientation

Select between LANDSCAPE and PORTRAIT.

Priority

Specify printing task priority among HIGH, MED and LOW.

Film Size

Select film size among the selections listed in the drop-down list.

Display Format

Specify quantity of printed files, e.g. STANDARD\2, 3 indicates 6
images are printed for each page.

Medium Type

Specify print medium: Paper, Clear Film, Blue Film; select Blue Film
or Clear Film for black and white printing; select Paper for color
printing.

Trim

Specify whether you want a trim box to be printed around each image
on the film: Yes or No.

Configuration Info

Enter configuration information in the field.

Min Density

Enter the minimum density of the film.

Max Density

Enter the maximum density of the film.

Destination

Specify where the file is exposed: MAGAZINE (stored in the
magazine), or, PROCESSOR (exposed in the processor).

Magnification Type

Select how the printer magnifies an image to fit the film.
• Replicate: interpolated pixels belong to duplicate of adjacent pixels);
• Bilinear: interpolated pixels are generated from bilinear

interpolations between adjacent pixels;

• Cubic: interpolated pixels are generated from cubic interpolations

between adjacent pixels;

• None: without interpolation.

Summary of Contents for Anesus ME7T

























































































































































































































































































































Search results

Summary of Contents for Anesus ME7T

Reviews:

Related manuals for Anesus ME7T

Brands by name

Popular brands

Mindray Anesus ME7T, Operator'S Manual

Search results

Summary of Contents for Anesus ME7T

Reviews:

Related manuals for Anesus ME7T

Brands by name

Popular brands