Mindray Anesus ME7T Operator'S Manual Download

Page: 66 / 312

4 - 8

Operator’s Manual

4 Setup

• The third row is empty.
• Measurement value, Standard deviation (-), GA value, Standard deviation (+): enter the

number of days without the unit.

User-defined OB Items

NOTE:

The calculation results of the user-defined OB formulae are used for reference rather than clinical
diagnosis.

You can add user-defined formulae for items (obstetric tools) that are not included in the GA and
FG table.
1.

Select [More OB Items] on the Fetal Gestational Age or Fetal Growth page.

Select an item and click [OK].

The new item appears in the left column and the system asks if to add a formula.

Click [OK] to select the *.csv file (formula file) for the item. Or add a formula for the new item
by clicking [Import].

Measure Result

EDD display: the EDD is displayed in the result window after checking.

GA Cycle For EDD

•

Normal Cycle: GA is calculated according to 40 weeks after checking (EDD=LMP+287(40
weeks)).

•

French Cycle: GA is calculated according to 41 weeks after checking (EDD=LMP+287(41
weeks)).

Display EFW GA in report

Estimate GA according to EFW data after checking.

4.1.6 Key Probe

Assign functions to the key probe buttons.

4.1.7 Key Configuration

Assign functions to the foot switch and user-defined keys.

Key function setting

You can set the functions for <Save> and user-defined keys.
To assign a function to a key:
1.

Click to select the desired key in the Key Function column on the left side of the page.

Item

Description

To set the function of K1 button.

To set the function of K2 button.

To set the function of K3 button.

Enable Key Probe Key
Function

After it is ticked, the key function of Key probe is enabled.

Summary of Contents for Anesus ME7T

























































































































































































































































































































Search results

Summary of Contents for Anesus ME7T

Reviews:

Related manuals for Anesus ME7T

Brands by name

Popular brands

Mindray Anesus ME7T, Operator'S Manual

Search results

Summary of Contents for Anesus ME7T

Reviews:

Related manuals for Anesus ME7T

Brands by name

Popular brands