Mindray DPM 6, Quick Reference Manual

P/N: 046-003757-00 Rev A

Quick Reference Guide

4

ECG

Adjust ECG Lead

The DPM 6 and DPM 7 allow the clinician to adjust the leads being viewed on 
the main display. To adjust the ECG Lead:

a.  Select ECG waveform or ECG numeric tile to enter the ECG Setup menu

Or

a.  Select 

ECG setup>>

 from the Parameters menu in 

Main Menu

(quick key) to enter the ECG Setup menu 

  b.  Select 

ECG1

 current lead to adjust the first lead or 

ECG2

 current lead to 

adjust the second lead

  c.  Scroll and select lead
  d.  Select 

Main Menu

(quick key) or 

to return to the main display

Panorama® Central Station Interface: 

Adjusting ECG leads on the DPM 6 

or DPM 7 bedside monitor, Panorama® Central Station, WorkStation, and 
ViewStation are independent.

Enable Pacemaker Detection And Set Pacemaker Rate

The DPM 6 and DPM 7 allow the clinician to enable pacemaker detection.  
The 

symbol is displayed when the pacemaker detection is enabled.

To enable the pacemaker detection on the DPM 6 or DPM 7 bedside monitor:
  a.  Select ECG waveform or ECG numeric tile to enter the ECG Setup menu
Or
  a.  Select 

ECG setup>>

 from the Parameter menu in 

Main Menu

(quick key) to enter the ECG Setup menu

  b.  Select 

Others >>

  c.  Select 

Paced

 to Yes

  d.  Select 

Pacemaker Rate

 value and adjust using the up and down arrows

  e.  Select 

Main Menu

(quick key) or 

to return to the main display

Panorama® Central Station Interface:

 Pacemaker detection on the DPM 6 or 

DPM 7 monitor, Panorama® Central Station, WorkStation, and ViewStation are 
independent.