P/N: 046-003757-00 Rev A
Quick Reference Guide
5
Initiate Relearn
To initiate relearning manually on the DPM 6 or DPM 7 bedside monitor:
a. Select
ECG Setup
menu by selecting ECG waveform/HR numeric tile or
from
Parameters
menu (
or
Main Menu
quick keys)
b. Select
Relearn
c. Select
Main Menu
(quick key) or
to return to the main display
Initiate ST Analysis
To initiate ST analysis on the DPM 6 or DPM 7 bedside monitor:
a. Select
ECG Setup
menu by selecting ECG waveform/HR numeric tile or
from
Parameters
menu (
or
Main Menu
quick keys)
b. Select
ST Analysis >>
c. Select ON for
ST analysis
value
d. Select
Main Menu
(quick key) or
to return to the main display
NIBP
Initiate a Non-Invasive Blood Pressure Measurement (NIBP)
To initiate a NIBP measurement on a patient on the DPM 6 or DPM 7 bedside
monitor:
a. Select
on the front panel of the monitor or the Multi-Parameter
Module (MPM)
Or
a. Select NIBP numeric tile, or enter the
NIBP Setup >>
from the Parameters
menu in
Main Menu
(quick key) to enter the NIBP Setup menu
b. Select
Start NIBP
c. Select
Main Menu
(quick key) or
to return to the main display
Set a Non-Invasive Blood Pressure Measurement Interval
The DPM 6 and DPM 7 allow the clinician to set an interval for a NIBP
measurement to be obtained automatically.
To set an automatic interval on the DPM 6 or DPM 7 bedside monitor:
a. Select NIBP measurement
(quick key) and Select interval
Summary of Contents for DPM 6
Page 1: ...Quick Reference Guide...
Page 6: ......
