Stability range (menu item [TARE] 1.5)
Auto zero (menu item [AUT.ZERO] 1.6)
Weight unit 1 (menu item [1.WT.UNIT] 1.7)
Menu: [SETUP] - [WP-1] - [INTERN.] - [PARAM.2] (3) (see chapter
)
Weight unit 2 (menu item [2.WT.UNIT] 3.1)
Weight unit 3 (menu item [3.WT.UNIT] 3.3)
The above parameters are reset to factory settings (menu item [RESET] -
[WT.PARA] - [YES] 9.1.1) (see chapter
)
-
Switching the
key to or from a 10-fold higher resolution (menu item [FN-
KEY] - [RES.×10] ) (see chapter
)
-
Turning the application automatic taring on/of (menu item [AUT.TARE] 3.7) (see
chapter
-
The application parameters are reset to factory settings (menu item [RESET] -
[WT.PARA] - [YES] 9.1.1) (see chapter
).
7.1.5
Device parameters
-
Password protection (see Chapter
)
-
Acoustic signal (see Chapter
)
-
Keyboard (see Chapter
-
Switch of Combics automatically (see Chapter
)
-
Illumination of the display (see Chapter
-
Timer (see Chapter
-
Example 1: Switch on, zero, tare container weight, ill container, switch to gross
weight display, second weight unit or 10x resolution (see Chapter
)
7.1.5.1
Password protection
Menu: [SETUP]- [BEN.CODE] (see also Chapter
)
Access to the [SETUP] device parameters can be protected against unauthorized
adjustment with a password in the setup menu under [BEN.CODE] (see Chapter
7.1.5.2
Acoustic signal
An acoustic signal (single beep for active, double beep for inactive keys) is emitted when
you press a key.
Menu: [SETUP] - [UTILIT.] - [PARAMET] - [SIGNAL] (8.2) (see chapter
)
In the SETUP menu, the acoustic signal can be turned on/of under [SIGNAL] (8.2).
7.1.5.3
Keyboard
Menu: [SETUP]- [BETRIEB]- [PARAMET]- [TASTEN] (8.3) (see also Chapter
)
.
To display both counters, press and hold the
key for longer than 2 seconds.
The "Coniguration counter" is then shown in the weight display for 3 seconds
(identiied by a [P]). Then the "Adjustment counter" is displayed for another
3 seconds (identiied by a [C]). After 6 seconds, the information display turns of
automatically.
7 Operating
Combics 1 Series Complete Scales Models CAW1P, CAW1S, CAS1
Minebea Intec
EN-85