7.12.7
Digital Input/Output Interface
The Classiication application supports the digital input/output-interface. The four
outputs are activated as follows:
-
With 3 classes:
-
Class 1 ? red LED (output <)
-
Class 2 ? green LED (output =)
-
Class 3 ? yellow LED (output >)
-
Set
-
With 5 classes:
-
Class 1/2 (output <)
-
Class 2/3/4 (output =)
-
Class 4/5 (output >)
-
Set
The outputs can also be galvanically isolated using option A5.
Acoustic signal: An acoustic signal can be activated in addition to the green LED.
Setting: [SETUP] - [UTILIT.] - [PARAMET] - [SIGNAL] - [ON] (8.2.1) (see chapter
or
).
In the [APPLIC.] - [APPLIC.2] - [CLASS.] - [PARAM2] - [OUTP.ACT] (4.7) "Activation of
outputs" menu (see chapter
), you can make the following settings for the control
outputs:
-
switched of
-
always on
-
on at stability
7 Operating
Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec
EN-149
