7.17 Product Data Memory
The product data memory stores initialization data and user data (product and tare
values).
Features
-
The product data memory has 100 memory cells for product or tare values. For
example, you can store 80 sets of application data and 20 tare values
-
Each memory cell is uniquely identiied by a number of up to three digits.
-
The product data memory can be used with the following applications:
-
Application 1
Basic Weighing, Counting, Neutral Measurement, Animal Weighing, Weighing in
Percent
-
Application 2
Checkweighing, Classiication
-
Data records can be created, overwritten and individually deleted
-
Data remains stored when the scale is switched of
7.17.1
Saving product data
In this example in the "Counting" application.
7.17.2
Saving preset tare values
7.17.3
Activating saved product or tare values
7.17.4
Displaying information for a speciic product or tare value
-
Use the
key to switch between wRef (average piece weight) and nRef
(quantity).
-
Use the
key to scroll the displayed value to the right.
-
Use the
key to activate the displayed memory.
-
Press and hold the
key (min. 2keyseconds) to delete the displayed memory.
7.17.5
Displaying information for all product or tare memories
-
Press the
key to scroll through in lexical order (e.g. 1, 3, 333, 4, etc.).
1. Start the Counting application.
2. Enter a memory number and press and hold the
key (min 2 seconds).
1. Allocate preset tare memory.
2. Enter a memory number and press and hold the
key (min 2 seconds).
Enter a memory number and press the
key.
1. Enter a memory number and press the
key.
2. Exit the mode using the
key.
1. Press the
key to display the irst memory number.
Combics 2 Series Complete Scales Models CAW2P, CAW2S
7 Operating
EN-170
Minebea Intec
