-
Press the
key to activate the selected memory number.
-
Press the
key to display the saved product values.
-
Press and hold the
key (min. 2 seconds) to delete the selected memory
number.
7.17.6
Deleting speciic memory numbers
7.17.7
Example: Product Data Memory
Using the Counting application with a stored average piece weight.
Coniguration: Application: Counting ([COUNT.])
Saving the average piece weight
Loading the average piece weight or reference sample quantity
-
Use the
key to switch between wRef (average piece weight) and nRef
(quantity).
-
Use the
key to scroll the displayed value to the right.
-
Use the
key to activate the displayed memory.
-
Press and hold the
key (min. 2 seconds) to delete the displayed memory.
Overwriting data in a memory cell
Deleting an average piece weight
2. Exit the mode using the
key.
Enter a memory number and press and hold the
key.
1. Start the application.
2. Determine the average piece weight using one of the methods described above.
3. Enter the memory cell number using the keypad, and press and hold the
key
(min. 2 seconds).
4. Enter the memory cell number and press the
key.
5. Exit the mode using the
key.
6. Enter the memory cell number to be overwritten via the keypad.
7. Press and hold the
key (min. 2 seconds).
To cancel without saving, press the
key.
The previous average piece weight is overwritten.
8. Enter the memory cell number of the average piece weight to be overwritten.
9. Press the
key.
10. Delete the displayed value by pressing and holding the
key (min. 2 seconds).
7 Operating
Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec
EN-171
