Command
Meaning
a4xxx_
Output of Alibi memory data log with the transaction number xxx
a6_
Write next stable weight value to the Alibi memory
a7_
Press ESCP to write the stable weight value previously requested to the
Alibi memory. The transaction number is returned. Only efective in con-
junction with SBI setting: Protocol print without standstill (see Chap-
ter
menu item [PROT.OHN])
z1_
Input: Protocol header 1
z2_
Input: Protocol header 2
z3xx_…z8xx_: Input: ID 1 … 6
txx…x_xx…x: Input text, length according to input, for display in the measured value
line
The character "_" (underline) is the ASCII character 95 decimal.
Format for the input of the protocol headers: "ESC z x a … a _ CR LF" with x=1 or 2 and a …
a: 1 … 20 characters for the header x, followed by the characters underline, CR and LF.
8.5 Data output format
A print line consists of a maximum of 22 characters (20 printable characters plus two
control characters). The irst 6 characters, known as the header, mark the following value.
The marking (header) can be deactivated under menu item [FORMAT] (see
Chapter
) so that the print line consists of 16 characters (14 printable characters
plus two control characters).
Example: Output without marking
+ 253 pcs
16 characters are displayed
Example: Output with marking
Qnt + 253 pcs
22 characters are displayed
Characters that are not visible in the display are displayed as blank spaces. No decimal
point is displayed for numbers without a decimal point.
8.5.1
Output format with 16 characters (without header)
Normal operation
Position
1
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+ *
A A A A A A A A *
E E E CR LF
or
– *
A A A A A A A A *
E E E CR LF
or
*
*
*
*
*
*
*
*
*
*
*
*
*
CR LF
+ -: Algebraic sign
*: Blank space
A: Characters of the display (max. 7 characters and decimal point)
E: Characters for the unit (1 … 3 letters, followed by 2 … 0 blank spaces)
Combics 2 Series Complete Scales Models CAW2P, CAW2S
8 Data interfaces
EN-178
Minebea Intec
