8.6 Conigure data interface as printer interface (PRINTER)
One or two strip printers or one or two label printers can be connected to Combics. The
interfaces COM1 and UniCOM are conigured as the printer interface in the menu item
[DRUCKER] (see Chapter
and
A command for the data output to the printer interface is generated:
-
when requested via the key
.
If the user is in the operating menu, then all menu settings under the currently
displayed menu item are printed out.
-
After receiving the SBI command "ESC k P _",
For this purpose, see the section "Data input format" in this Chapter (
).
-
In some applications after pressing the appropriate key (e.g. acknowledging the data
transfer or start of the evaluation). In this case, a conigurable print protocol is
printed out with application-speciic data.
During the data output, the symbols
and
are shown in the display.
8.7 Coniguring print output
The printout is conigured in the setup menu under "Print protocols" ([SETUP]- [DRUCK]-
[PROTOK.]) (see also Chapter
).
A separate protocol can be conigured for each interface. Each protocol is composed of
diferent information blocks which are activated or deactivated by multiple selection in
the menu.
For the "Totalization" and "Net total" applications, the totalization/result protocol can be
conigured independently of the single/component protocol.
Headers
2 headers with max. 20 characters each are available (e.g.for printing the company
name).
Input: Menu items [KOPFZL]- [ZEILE 1] 7.4.1 and [KOPFZL]- [ZEILE 2] 7.4.2. Empty
headers are not printed.
Example
print image:
EISENSCHMIDT
GOETTINGEN
In this example, the company name is printed in the center because the text is preceded
by 4 or 5 blank spaces.
8.8 GMP protocol
This function adds a GMP header and a GMP footer to the print protocol (GMP: Good
Manufacturing Practice).
Setting: [SETUP]- [DRUCK]- [PROTOK.]- [GMP.PROT] 7.13 (see also Chapter
The GMP header is printed prior to the irst measurement result. The GMP footer is
printed either after each individual measurement result ("GMP protocol always for
1 measurement result", menu setting [AUS]7.13.1) or after the inal measurement result in
a series of measurement results ("GMP protocol always for multiple measurement
results", menu setting 7.13.2). A series of measurement results is completed by pressing
8 Data interfaces
Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec
EN-183
