— SAVE WT
3.11 - Parameter for saving weight values
— STABIL.
3.11.1 - With stability*
— ACC.STAB
3.11.2 - With increased stability
— REF.WP
3.13 - Reference weighing instrument
— NO WP
3.13.1 - No platform selected*
— WP 1
3.13.2 - Weighing platform 1
— WP 2
3.13.3 - Weighing platform 2
— CALC.DIS
3.15 - Display of calculated value
— RESID.QT
3.15.1 - Residue*
— LOSS
3.15.2 - Calculation
— APPLIC.2
Checkweighing
, Classiication
applications
— OFF
Of
— CHECK.WG
Checkweighing
application (see
chapter
)
— CLASS.
Classiication application (see chapter
)
— APPLIC.2
Checkweighing
, Classiication
applications
— CHECK.WG
Checkweighing
application
— CHECK.RG
4.2 - Checkweighing range
— 30-170%
4.2.1 - 30 … 170%*
— 10-MAX.L
4.2.2 - 10% … ininity
— CTRL.SET
4.3 - Activate SET control output
— OUTPUT
4.3.1 - SET output*
— OP.READY
4.3.2 - Ready to operate (for process control
systems)
— OUTP.ACT
4.4 - Activation of outputs
— OFF
4.4.1 - Of
— ALWAY.ON
4.4.2 - Always
— STABIL.
4.4.3 - On at stability
— CHECK.RG
4.4.4 - On within checkweighing range*
— STAB.CHK
4.4.5 - On at stability within checkweighing
range
— INPUT
4.5 - Parameter input
— TAR.MN.MX
4.5.1 - Min, Max, target value*
— TARG.PER
4.5.2 - Only target value with percent limits
— TAR.A.PER
4.5.3 - Target value with asymmetrical percent
limits
— TAR.TOL.
4.5.4 - Target value with relative tolerances
— AUT.PRNT
4.6 - Automatic printing
* Factory setting
6.1.2
APPLIC.2
APPLIC.
APPLIC.2
6.1.2.1
CHECK.WG
APPLIC.
CHECK.WG
Combics 2 Series Complete Scales Models CAW2P, CAW2S
6 Menu structure
EN-62
Minebea Intec
