— AUT.TARE
1st weight tared
— OFF
3.7.1 - Of*
— ON
3.7.2 - On
— MIN.TARE
Minimum load for automatic taring and
automatic printing
— 1 DIGIT
3.5.1 - 1 digit*
— 2 DIGIT
3.5.2 - 2 digits
— 5 DIGIT
3.5.3 - 5 digits
— 10 DIGT
3.5.4 - 10 digits
— 20 DIGT
3.5.5 - 20 digits
— 50 DIGT
3.5.6 - 50 digits
— 100 DIG
3.5.7 - 100 digits
— 200 DIG
3.5.8 - 200 digits
— 500 DIG
3.5.9 - 500 digits
— 1000 DI
3.5.10 - 1000 digits
— AUT.STRT
Automatic start of application with last settings
— AUTOMAT
3.8.1 - Automatic (on)*
— MANUAL
3.8.2 - Manual (of)
— CLER.CF
Selective deleting with the
key
— ALL.APPL
3.24.1 - Deletes all applications*
— SEL.APPL
3.24.2 - Only deletes selected application
APPLIC.
AUT.TARE
* Factory setting
6.1.5
MIN.TARE
Minimum load for automatic tare and printout
APPLIC.
MIN.TARE
* Factory setting
6.1.6
AUT.STRT
For "On" automatic start of application with the last saved initialization data
APPLIC.
AUT.STRT
* Factory setting
6.1.7
CLER.CF
APPLIC.
CLER.CF
* Factory setting
6.1.8
TARE.FNC
Tare function
Combics 2 Series Complete Scales Models CAW2P, CAW2S
6 Menu structure
EN-66
Minebea Intec
