— SMA
SMA protocol (see chapter
— COM-1
Settings for the RS-232 interface
— DAT.PROT
Data protocols
— SBI
SBI protocol
— CONFIG.
5 - Coniguration (see chapter
)
— DAT.OUTP
6 - Data outputs (see chapter
)
— FORMAT
7 - Data outputs format (see chapter
)
— RESET
9 - Factory settings for COM1 (see
chapter
)
— COM-1
Settings for the RS-232 interface
— DAT.PROT
Data protocols
— SBI
SBI protocol
— CONFIG.
5 - Coniguration
— BAUD
5.1 - Baud rate
— 150
5.1.1 - 150
— 300
5.1.2 - 300
— 600
5.1.3 - 600
— 1200
5.1.4 - 1200
— 2400
5.1.5 - 2400*
— 4800
5.1.6 - 4800
— 9600
5.1.7 - 9600
— 19200
5.1.8 - 19200
— PARITY
5.2 - Parity
— SPACE
5.2.2 - Space
Only if 7 data bits is selected
— ODD
5.2.3 - Odd*
— EVEN
5.2.4 - Even
— NONE
5.2.5 - None
— STOPBIT
5.3 - Number of stop bits
— 1 Bit
5.3.1 - 1 stop bit*
— 2 BITS
5.3.2 - 2 stop bits
— HANDSHK
5.4 - Handshake mode
— SFTWARE
5.4.1 - Software handshake
— HRDWARE
5.4.3 - Hardware handshake, 1 character after
CTS*
— DATABIT
5.6 - Number of data bits
— 7 BITS
5.6.1 - 7 bits*
— 8 BITS
5.6.2 - 8 bits
* Factory setting
6.3.2.2.1 SBI
SETUP
SBI
6.3.2.2.1.1 CONFIG.
SETUP
CONFIG.
* Factory setting
6 Menu structure
Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec
EN-75
