— EVEN
5.2.4 - Even
— NONE
5.2.5 - None
— STOPBIT
5.3 - Number of stop bits
— 1 Bit
5.3.1 - 1 stop bit*
— 2 BITS
5.3.2 - 2 stop bits
— HANDSHK
5.4 - Handshake mode
— SFTWARE
5.4.1 - Software handshake
— HRDWARE
5.4.3 - Hardware handshake, 1 character after
CTS*
— DATABIT
5.6 - Anzahl Datenbits
— 7 BITS
5.6.1 - 7 bits
— 8 BITS
5.6.2 - 8 bits*
— UNICOM
Settings for the 2nd optional interface
— OFF
Of*
— WP-2
Weighing platform 2 (see chapter
)
— DAT.PROT
Data protocol (see chapter
— PRINTER
Printer coniguration (see chapter
)
— ANALOG
Analog data output port for PLC operation (see
chapter
)
— UNICOM
Settings for the 2nd optional interface
— WP-2
Weighing platform 2
— RS-232
RS-232 interface
— SBI.STRD
SBI standard
— SBI.VERF.
SBI trade version (for legal metrology)
— XBPI.232
xBPI.232 protocol (RS232-Mode)
— …
… more menus [AMBIENT] 1.1 … [1.DIS.DIG] 1.8
as under WP1 (see chapter
)
— CAL.JUST
1.9 - Calibration, adjustment (see
chapter
)
— CAL.EXT.
1.9.1 - External calibration/adjustment with
default weight*
— CAL.E.USR.
1.9.3 - External calibr./adjustment with user-
deined weight
— CAL.INT.
1.9.4 - Internal calibr./adjustment (for IS scales
only)
— GESPRT.
1.9.10 - Key
locked
— HND.EXT.G
1.18 - Manual entry of external weights (see
chapter
)
* Factory setting
6.3.3
UNICOM
SETUP
UNICOM
* Factory setting
6.3.3.1
WP-2
SETUP
WP-2
6 Menu structure
Combics 2 Series Complete Scales Models CAW2P, CAW2S
Minebea Intec
EN-79
